Dell SE2222H - Connecting Your Monitor

28 │ Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety instructions.
NOTE: Do not connect all cables to the computer at the same time. It is
recommended to route the cables through the cable-management slot
before you connect them to the monitor.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect VGA or HDMI cable from your monitor to the computer.
Connecting VGA cable
VGA
VGA
Connecting HDMI cable
HDMI
HDMI