Dell Secure Mobile Access 6200 - Creating a basic realm; Creating a local user; Configuring the Default WorkPlace Site

Dell Secure Mobile Access 6200/7200 Getting Started Guide
28
5In the Name field, type in a name for the local
authentication server.
6Click Save.
Creating a basic realm
A realm references an authentication server and determines
which access agents are provisioned to your users and what
end point control restrictions are imposed.
To create a basic realm that uses your local
authentication server:
1 Navigate to the User Access > Realms page.
2 Select click here.
3Click New realm on the Realms page.
4In the Name field, type in a name for the realm.
5In the Authentication server drop-down list, select the
local authentication server you just configured.
6Click Finish.
The Realms page displays your new realm and shows it
as associated with your local authentication server.
Creating a local user
To create a local user:
1 Navigate to the Security Administration > Users &
Groups page.
2Click the Local Accounts tab.
3Click New and select User.
4In the Username field, type in a name for the local
user.
5In the Password field, type in a password for the local
user.
6 Clear the User must change password at next login
checkbox.
7Click Save.
Configuring the Default WorkPlace Site
To configure the Default WorkPlace Site:
1 Navigate to the User Access > WorkPlace page and
click on the WorkPlace Sites tab.
2Click Default.