Dell Studio XPS 8100 - Replacing the Front USB Panel

Replacing the Front USB Panel


1. Follow the procedures in Before You Begin.

2. Align and slide the front USB panel clamp into the front USB panel clamp slot.

3. Replace the screw that secures the front USB panel to the front panel.

4. Connect the front USB panel cables to the system board connectors (see System Board Components).

5. Replace the front bezel (see Replacing the Front Bezel).

6. Replace the computer cover (see Replacing the Computer Cover).

7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page

CAUTION: Take care not to damage the cable connectors and the cable routing clips when sliding the front USB panel into the front USB panel
clamp slot.