Dell Studio Hybrid User Manual

Dell™StudioHybridServiceManual
Notes, Notices, and Cautions
Information in this document is subject to change without notice.
©2008DellInc.Allrightsreserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft, Windows, Windows Vista, and Windows Vista start button are either trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
June2008Rev.A00
Before You Begin
Replacing the Computer Cover
Replacing the Drive Cage
Replacing Drives
Technical Overview
Replacing Cards
Replacing Memory Module(s)
Replacing the Front I/O Panel
Replacing the RF Receiver Board
Replacing the Power Switch Assembly
Replacing the Battery
Replacing the Heat Sink
Replacing the Processor
Replacing the Back Panel
Replacing the Back I/O Board
Replacing the Fan
Replacing the System Board
Replacing the Bottom Logo Assembly
System Setup

NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Dell Studio Hybrid Specifications

General

Graphics	Intel GMA X3100
Networking	10/100/1000 Ethernet
Processor	Intel Core 2 Duo
Memory	Up to 4GB DDR2
Storage	Up to 320GB 5400RPM SATA
Operating System	Windows Vista Home Premium
Ports	HDMI, Ethernet
Chipset	Intel GM965 Express
Hard Drive	Up to 320GB 5400RPM SATA
Optical Drive	Slot-load DVD+/-RW
Audio	Integrated High Definition Audio
Wireless	Optional 802.11b/g/n

Summary

Replacing the Back I/O Board

Removing the Back I/O Board

Procedure for removing the Back I/O Board from the computer.

Installing the Back I/O Board

Procedure for installing the Back I/O Board onto the computer.

Replacing the Back Panel

Removing the Back Panel

Procedure for removing the back panel from the computer.

Installing the Back Panel

Procedure for installing the back panel onto the computer.

Before You Begin

Recommended Tools

Lists tools required for performing service procedures.

Turning Off Your Computer

Steps to safely shut down the computer before servicing.

Before Working Inside Your Computer

Safety guidelines and precautions before opening the computer.

Replacing the Bottom Logo Assembly

Removing the Bottom Logo Assembly

Procedure to remove the bottom logo assembly from the chassis.

Removing the Bottom Logo LED

Procedure to remove the LED from the bottom logo assembly.

Installing the Bottom Logo LED

Procedure to install the LED into the bottom logo assembly.

Installing the Bottom Logo Assembly

Procedure to install the bottom logo assembly back into the chassis.

Replacing the WLAN Card

Removing the WLAN Card

Procedure to remove the Wireless LAN card from the system board.

Installing the WLAN Card

Procedure to install the Wireless LAN card into the system board.

Replacing the Blu-ray Decode Acceleration Card

Removing the Blu-ray Decode Acceleration Card

Procedure to remove the Blu-ray decode acceleration card.

Installing the Blu-ray Decode Acceleration Card

Procedure to install the Blu-ray decode acceleration card.

Replacing the Riser Card

Removing the Riser Card

Procedure to remove the Riser Card from the drive cage.

Installing the Riser Card

Procedure to install the Riser Card into the drive cage.

Replacing the Battery

Removing the Battery

Procedure to remove the coin-cell battery from the computer.

Installing the Battery

Procedure to install a new coin-cell battery into the computer.

Replacing the Computer Cover

Removing the Computer Cover

Procedure to remove the computer cover from the chassis.

Installing the Computer Cover

Procedure to install the computer cover back onto the chassis.

Replacing the Hard Drive

Removing the Hard Drive

Procedure to remove the internal hard drive from the drive cage.

Installing the Hard Drive

Procedure to install a new internal hard drive into the drive cage.

Replacing the Optical Drive

Removing the Optical Drive

Procedure to remove the external optical drive from the drive cage.

Installing the Optical Drive

Procedure to install a new external optical drive into the drive cage.

Replacing the Drive Cage

Removing the Drive Cage

Procedure to remove the drive cage assembly from the chassis.

Installing the Drive Cage

Procedure to install the drive cage assembly into the chassis.

Replacing the Fan

Removing the Fan

Procedure to remove the system cooling fan from the back panel.

Installing the Fan

Procedure to install the system cooling fan onto the back panel.

Replacing the Front I/O Panel

Removing the Front I/O Panel

Procedure to remove the front panel I/O assembly.

Installing the Front I/O Panel

Procedure to install the front panel I/O assembly.

Replacing Memory Module(s)

Removing Memory Module(s)

Procedure to remove memory modules from the SO-DIMM sockets.

Installing Memory Module(s)

Procedure to install new memory modules into the SO-DIMM sockets.

Replacing the Power Switch Assembly

Removing the Power Switch Assembly

Procedure to remove the power switch and LED assembly.

Installing the Power Switch Assembly

Procedure to install the power switch and LED assembly.

Replacing the Processor

Removing the Processor

Procedure to remove the CPU from the ZIF socket.

Installing the Processor

Procedure to install a new CPU into the ZIF socket.

Replacing the Heat Sink

Removing the Heat Sink

Procedure to remove the processor heat sink assembly.

Installing the Heat Sink

Procedure to install a new processor heat sink assembly.

Replacing the RF Receiver Board

Removing the RF Receiver Board

Procedure to remove the RF receiver board from the chassis.

Installing the RF Receiver Board

Procedure to install the RF receiver board onto the chassis.

System Setup

Overview

Explains the purpose and use of System Setup.

Entering System Setup

Steps to access the computer's BIOS setup utility.

System Setup Options

Description of the different areas and fields within System Setup.

Boot Sequence

Changing Boot Sequence for the Current Boot

How to change boot order for a single boot session.

Changing Boot Sequence for Future Boots

How to permanently change the default boot order.

Clearing CMOS Settings

Replacing the System Board

Removing the System Board

Procedure to remove the main system board from the chassis.

Installing the System Board

Procedure to install a new system board into the chassis.

Technical Overview

Inside View of Your Computer

Diagram and labels for internal computer components.

System Board Components

Detailed labels and descriptions of system board connectors and parts.