Dell Studio Hybrid - Installing the Computer Cover


5. Remove the screw located at the back of the computer. Slide the cover towards the back of the computer and pivot the cover up, away from the
computer.
Installing the Computer Cover

1. Ensure that all the cables are connected and that no tools or extra parts (including screws) are left inside the computer.

2. Pivot the cover down and into position.

3. Push the cover until it clicks into place.

4. Replace the screw at the back of the computer.

5. To insert the sleeve, place the computer vertically and push the sleeve gently towards the front of your computer.
NOTICE: To avoid scratches during this procedure, place the computer on a mat.