Dell U2413 - Back View

Back View
Back View with monitor stand
Label Description Use
1
VESA mounting holes (100 mm x 100 mm -
behind attached VESA Plate)
Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm).
2 Regulatory label List the regulatory approvals.
3 Stand release button Release stand from monitor.
4 Connector label Indicate the connector locations.
5 Security lock slot Secure monitor with security cable lock.
6 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.
7 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
8 Cable management slot For cable management. Route cables through the slot.