Dell U3014t User Manual

The default out of factory setting in the U3014 is DP1.1a.
To enable MST connection please use only DP cable as provided in box (or other DP1.2 certified cable) and change the DP setting to DP1.2 by performing the below steps:
A) Monitor is able to show content
1. Use OSD button to navigate to Display Settings
2. Go to DisplayPort 1.2 selection
3. Select Enable or Disable accordingly
4. Follow the screen message to confirm selection of DP1.2 or DP1.1a

Dell U3014t Specifications

General

Tiltable	yes
Touch Screen	no
OS Compatibility	windows
Screen Size	29.8 inches
Aspect Ratio	16:10
Resolution	2560 x 1440
Response Time	6 milliseconds
Brightness	350 candela per square meter
Contrast Ratio	2, 000, 000:1
Built-In Speakers	no
Width with Stand	27.2 inches
Net Weight without Stand	23.9 pounds