Dell Vostro 1014 - Processor Fan; Removing the Processor Fan

Back to Contents Page
Processor Fan
Dell™Vostro™1014/1015ServiceManual
Removing the Processor Fan
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Remove the access panel.
4. Remove the hard drive.
5. Remove the WLAN card.
6. Remove the control panel cover.
7. Remove the keyboard.
8. Remove the display assembly.
9. Remove the palm rest.
10. Disconnect the processor fan cable from the connector on the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.