Dell Vostro 1014 - Memory; Removing Memory Modules

Back to Contents Page
Memory
Dell™Vostro™1014/1015ServiceManual
Removing Memory Modules
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Remove the access panel.
4. Use your fingertips to carefully spread apart the securing clips on each end of the first memory module connector until the first module pops up.
5. Slide the first memory module from its socket and remove the module from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.