Dell Vostro 1014 - Removing the System Board (Vostro 1015)

2. Remove the ExpressCard.
3. Remove the memory card.
4. Remove the battery.
5. Remove the access panel.
6. Remove the hard drive.
7. Remove the memory modules.
8. Remove the WLAN card.
9. Remove the control panel cover.
10. Remove the keyboard.
11. Remove the display assembly.
12. Remove the palm rest.
13. Remove the processor fan.
14. Remove the I/O board.
15. Remove the Bluetooth wireless card.
16. Disconnect the speaker cables from the system board.
17. Disconnect the power cable from the system board.