Back to Contents Page
Camera
Dell™Vostro™1320ServiceManual
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the display assembly from the computer.
3. Remove the display bezel from the display assembly.
4. Remove the display inverter from the display assembly.
5. Remove the screw that secures the display camera to the display assembly.
6. Lift the camera from its slot.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
To Next Page
Loading...
