Dell Vostro 1320 - Heat Sink and Processor; Removing the Heat Sink and Processor

Back to Contents Page
Heat Sink and Processor
Dell™Vostro™1320ServiceManual
Removing the Heat Sink and Processor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the access panel from the computer.
4. Remove the fan from the computer.
5. Loosen the four captive screws that secure the heat sink to the computer.
6. Lift the edge of the heat sink that is closest to the center of the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.