Dell Vostro 1320 - Display Inverter; Removing the Display Inverter

Back to Contents Page
Display Inverter
Dell™Vostro™1320ServiceManual
Removing the Display Inverter
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the display assembly from the computer.
3. Remove the display bezel from the computer.
3. Remove the screw that secures the display inverter to the display assembly.
4. Disconnect the inverter power cable from the display assembly.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.