b. Lift up the front bezel to remove it from the computer [3].
Figure 2.
Installing the front bezel
1. Hold the bezel and ensure that the hooks on the tabs snap into the notches on the computer.
2. Rotate the front bezel toward the front of the computer.
3. Press the front bezel until the tabs snap in.
4. Install the cover.
5. Follow the procedures in After Working Inside Your Computer.
Removing the hard drive assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. cover
b. front bezel
3. Disconnect the power and the data cables from the hard drive.
8