Installing The Display Brackets, Hinges and Panel
1. Tighten the screws to secure the display brackets and hinges to the display
panel.
2. Affix the display cable to the back of the display panel
3. Secure the cables through the left hinge.
4. Tighten the screws to secure the display brackets and hinges to the display
assembly.
5. Secure the antenna cable to the right hinge.
6. Install the
display camera
.
7. Install the
display bezel
.
8. Install the
display assembly
.
9. Install the
palm rest
.
10. Install the
WWAN card
.
11. Install the
keyboard
.
12. Install the
hard drive
.
13. Install the
WLAN card
.
14. Install the
access panel
.
15. Install the
memory card
.
16. Install the
battery
.
17. Follow the procedures in
After Working Inside Your Computer
.
83