Removing the Wireless Device
1. Follow the procedures in Before Working Inside Your Computer.
2. Follow the procedures to remove the wireless device from the computer:
a. Remove the screws that secure the wireless-device cable from the computer.
b. Disconnect the wireless-device cable from its connector and remove it from the computer.
3. Press the blue tab [1] and slide down the release-lever that secures the wireless LAN card [2].
4. Pull the wireless LAN card to remove from the computer [3].
Installing the Wireless Device
1. Install the wireless LAN card to its connector on the system board.
2. Install the release-lever to secure the wireless LAN card.
3. Connect the wireless-device cable to its connector on the computer.
4. Tighten the screws to secure the wireless-device cable to the computer.
5. Follow the procedures in After Working Inside Your Computer.
21
To Next Page
Loading...
