4th Boot Device Allows you to enable or disable the boot device.
5th Boot Device Allows you to enable or disable the boot device.
Hard Disk Drivers Displays information about hard-disk drivers.
CD/DVD ROM Drivers Displays information about CD/DVD ROM drivers.
Network Drivers Displays information about network drives.
Power
Wake up by Integrated LAN/WLAN Allows you to enable or disable Wake up by
Integrated LAN/WLAN
AC Recovery Specifies the AC recovery mode.
Auto Power On Allows you to enable or disable Auto Power On
mode.
Auto Power On Mode Allows you to select the day to enable the Auto
Power On mode.
Auto Power On Date Allows you to select the specific date to enable the
Auto Power On mode.
Auto Power On Time Allows you to select the specific time to enable the
Auto Power On mode.
Security
Supervisor Password
Specifies whether an administrator password has
been assigned.
User Password Specifies whether a user password has been
assigned.
Set Supervisor Password Allows you to change or delete the administrator
password.
HDD Protection Allows you to enable or disable the HDD
protection.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
System Setup Overview
System Setup allows you to:
• change the system configuration information after you add, change, or remove any hardware in your
computer.
• set or change a user-selectable option such as the user password.
• read the current amount of memory or set the type of hard drive installed.
33
To Next Page
Loading...
