Dell Vostro 430 - Power-Button Assembly; Removing the Power-Button Assembly

Back to Contents Page
Power-Button Assembly
Dell™Vostro™430ServiceManual
Removing the Power-Button Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the Cover.
3. Remove the Front Panel.
4. Disconnect the power-button cable from the system board.
5. Press down on the clips that secure the hard-drive activity light and power-button assembly to the front panel.
6. Pull the hard-drive activity light and power-button assembly away from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.