Dell Vostro 430 - Processor; Removing the Processor

Back to Contents Page
Processor
Dell™Vostro™430ServiceManual
Removing the Processor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the Cover.
3. Remove the Processor Heat-Sink and Fan Assembly.
4. Push the release lever down and out of its retention hook.
5. Lift the release lever and open the processor cover.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.