Examples of Common Printing Configurations 77
Using INI Parameters for Non-Windows Network Printers (LPD)
Configuring network printing using ThinOS INI parameters is simple and an easy way
to configure a printer for all clients in your environment assuming every printer is the
same.
Your INI parameters will look something like the following:
Printer=LPD1 \
LocalName="HP LaserJet 4200n" \
Host=10.10.10.1 \
Queue=auto \
PrinterID="HP LaserJet 4200 PCL6" \
Enabled=yes
NOTE: The PrinterID is the exact text of the Windows printer driver name, so if a printer
driver is named HP LaserJet 4200n PCL6 in Windows, then it must be exactly the same
in the PrinterID field in the INI parameters including capitalizations and spaces.
To Next Page
Loading...
