18 Battery
Replacing the Battery
1
Align the screw holes on the battery with the screw holes on the
palm-rest assembly.
2
Replace the screws that secure the battery to the palm-rest assembly.
3
Connect the battery cable to the system-board.
Postrequisites
1
Replace the power-light board. See "Replacing the Power-Light Board" on
page 16.
2
Replace the base cover. See "Replacing the Base Cover" on page 14.
3
Follow the instructions in "After Working Inside Your Computer" on page 11.
OM_Book.book Page 18 Tuesday, September 25, 2012 2:30 PM
To Next Page
Loading...
