Table 9. System setup options—Power menu (continued)
Power
Enable Advanced Battery Charge
Configuration
Enables Advanced Battery Charge Configuration from the beginning of the day
to a specified work period. Advanced Battery Charged maximizes battery health
while still supporting heavy use during the work day.
Default: OFF
Peak Shift
Enable Peak Shift Enables the computer to run on battery during peak power usage hours.
Default: OFF
Thermal Management
Thermal Management Adjusts system performance, noise, and temperature.
Default: Optimized. Standard setting for balance of performance, noise, and
temperature.
USB Wake Support
Wake on Dell USB-C Dock Enables connecting a Dell USB-C Dock to wake the computer from Standby.
Default: ON
Block Sleep
Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel® Rapid Start will be
disabled automatically, and the operating system power option will be blank if
it was set to Sleep.
Lid Switch
Enable Lid Switch Enables or disables the lid switch.
Power On Lid Open Enables the computer to power up from the off state whenever the lid is opened.
Default: ON
Intel® Speed Shift Technology Enables or disables the Intel® Speed Shift Technology support. Setting this
option to enable allows the operating system to select the appropriate processor
performance automatically.
Default: ON
Table 10. System setup options—Security menu
Security
TPM 2.0 Security On
TPM 2.0 Security On Select whether or not the Trusted Platform Model (TPM) is visible to the OS.
Default: ON
PPI Bypass for Enable Commands Enables or disables the OS to skip BIOS Physical Presence Interface (PPI) user
prompts when issuing TPM PPI enabled and activate commands.
Default: OFF
PPI Bypass for Disable Commands Enables or disables The OS to skip BIOS PPI user prompts when issuing TPM PPI
Disable and Deactivate commands.
Default: OFF
54 System setup
To Next Page
Loading...
