Table 15. System setup options—Pre-boot Behavior menu (continued)
Pre-boot Behavior
Extend BIOS POST Time
Extend BIOS POST Time Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
MAC Address Pass-Through
MAC Address Pass-Through Replaces the external NIC MAC address (in a supported dock or dongle) with the
selected MAC address from the computer.
Default: System Unique MAC Address.
Mouse/Touchpad
Mouse/Touchpad Defines how the computer handles mouse and touchpad input.
Default: Touchpad and PS/2 Mouse. Leave the integrated touchpad enabled
when an external PS/2 mouse is present.
Sign of Life
Early Logo Display Display Logo Sign of Life.
Default: ON
Early Keyboard Backlight Keyboard Backlight Sign of Life.
Default: ON
Table 16. System setup options—Virtualization menu
Virtualization Support
Intel® Virtualization Technology
Enable Intel® Virtualization Technology
(VT)
Enables the computer to run a virtual machine monitor (VMM).
Default: ON
VT for Direct I/O
Enable Intel® VT for Direct I/O Enables the computer to perform Virtualization Technology for Direct I/O (VT-d).
VT-d is an Intel® method that provides virtualization for memory map I/O.
Default: ON
Intel® Trusted Execution Technology
(TXT)
Enables Intel® Trusted Execution Technology (TXT).
Default: OFF
DMA Protection
Enable Pre-Boot DMA Support Controls Pre-Boot DMA protection for both Internal and External ports.
Default: ON
Enable OS Kernel DMA Support Controls Kernel DMA protection for both Internal and External ports. This setting
does not directly enable DMA protection in the OS.
Default: ON
Table 17. System setup options—Performance menu
Performance
Multi-Core Support
Multiple Atom Cores Changes the number of Atom cores available to the operating system. The default
value is set to the maximum number of cores.
System setup 59
To Next Page
Loading...
