Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the system board.
2. Install the display assembly.
3. Install the I/O board.
4. Install the left fan.
5. Install the right fan.
6. Install the heat sink.
7. Install the solid state drive 2.
8. Install the solid state drive 1.
9. Install the memory module.
10. Install the battery.
11. Install the speakers.
12. Install the base cover.
13. Follow the procedure in After working inside your computer.
52
Removing and installing components
To Next Page
Loading...
