Dell XPS 8700 - Replacing the Graphics-Card Bracket (Optional); Procedure; Postrequisites

Replacing the Graphics-Card Bracket (optional) | 25
Replacing the Graphics-Card Bracket (optional)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the graphics-card bracket with the screw holes on the
chassis.
2 Replace the screws that secure the graphics-card bracket to the chassis..
Postrequisites
Replace the computer cover. See "Replacing the Computer Cover" on page 16.
OM_Book.book Page 25 Tuesday, April 30, 2013 6:07 PM