Dell XPS 8700 - Replacing the Hard-Drive Cage; Procedure; Postrequisites

Replacing the Hard-Drive Cage | 39
Replacing the Hard-Drive Cage
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the hard-drive cage with the screw holes on the chassis.
2 Replace the screws that secure the hard-drive cage to the chassis.
3 If applicable, connect the power and data cables to the secondary hard-drive.
Postrequisites
1 Replace the primary hard-drive. See "Replacing the Primary Hard-Drive" on page 37.
2 Replace the computer cover. See "Replacing the Computer Cover" on page 16.
OM_Book.book Page 39 Tuesday, April 30, 2013 6:07 PM