Dell XPS M1330 - Replacing the Hinge Covers and Center Control Cover

Hinge Covers and Center Control Cover: Dell XPS M1330 Service Manual
file:///C|/Users/SIIES/Downloads/Dell XPS 1330/hingecvr.htm#wp1179889[16/07/2010 06:26:17 p.m.]
1 cable release tabs (2) 2 center control cover cable
Replacing the Hinge Covers and Center Control Cover
1. Reconnect the cable that attaches the center control cover to the system board, and snap the center control cover in
place.
2. Replace the keyboard (see Replacing the Keyboard).
3. Replace the hinge covers.
4. Turn the computer over and replace the two M2 x 3-mm screws that secure the center control cover to the computer
base.
Back to Contents Page