11
TYPE OF HOTPLATES
RADIANT HOTPLATES:
■ Each radiant plate is comprised of the elements which can be controlled
either separately or together using the 7 position switches fig. 6.
■ The temperature control knobs must be turned anti clockwise. When a plate
is on, the indicator light on the control panel will be lit.
■ When the temperature of any plate is over 60°C the residual heat warning
light at the front of the hob will light up.
■ This light will stay on even after the hob has been switched off to show
that the hob surface is still hot.
■ This light will automatically switch off when the surface temperature falls
below 60°C.
Figure 6
To Next Page
Loading...
