1 - Time when the oven is programmed (10:00)
2 - Time necessary to cook the food (2 hours)
3 - Time when cooking will be completed (12:00)
CAUTION: after a black-out three zeroes
"0:00" appear on the display.
The semi-automatic cooking is cancelled.
Example
SEMI-AUTOMATIC COOKING - ONLY END OF COOKING
This automatically switches off the oven after the required cooking time.
Two methods of semi-automatic cooking are available:
1
ST
METHOD: Programming the duration of the cooking
• Set the oven (function and temperature) as indicated in the “USING THE OVEN - COOK-
ING FUNCTIONS” chapter.
•
Set the duration of the cooking (“hh:mm” - hours and minutes) by pressing button
(“ : ” symbol flashes on the programmer display) and then button to move
forward or to move back if you have gone beyond the required time. Set it to ten
minutes less than the time required because the stored heat will complete the cooking.
•“A” letter and “ ” symbol appear on the programmer display; the oven starts to operate
immediately and it will switch off automatically at the end of the cooking time (an inter-
mittent acoustic signal sounds, the “A” letter and “ ” symbol flash on the programmer
display and the oven lamp is lit - press any pushbutton of the programmer [not ON/OFF]
to stop the intermittent acoustic signal).
• During cooking press button (press two times if the oven lamp is not lit - first
press lights only oven lamp) to display the remaining duration of the cooking (countdown).
• During cooking press button (press two times if the oven lamp is not lit - first
press lights only oven lamp) to display the time when cooking will be completed.
• The cooking program can be cancelled at any time as indicated in the "CANCELLING A
SET PROGRAMME" chapter.
To Next Page