END OF A PROGRAMMED SEMI-AUTOMATIC OR
AUTOMATIC COOKING
At the end of the programmed semi-automatic or automatic cooking the oven switches
off automatically the heating elements and the oven lamp.
An intermittent acoustic signal sounds and the
“A”
letter and
“”
symbol flash on
the programmer display; the temperature display is deactivated.
Press any pushbutton of the programmer [not ON/OFF] to stop the intermittent acoustic
signal.
After pressing, the oven lamp lights (light mode) and the oven is ready to be used for
a new manual or programmed cooking otherwise it can be switched off as indicated
in the "OVEN PROGRAMMER ACTIVATION/DEACTIVATION" chapter.
AUDIBLE SIGNAL
You can choose from three variations.
To select press the button.
To Next Page