DeLonghi DTR 906-DF Series User Manual

4242
SEMI-AUTOMATIC COOKING
This is used to automatically switch o󰀨 the
oven after the desired cooking time has
elapsed.
There are two ways to set your oven:
1. Set the length of the cooking time
by pushing the
button and the
button to advance, or to go
backwards if you have passed the
desired time (g. 7.7).
or
2. Set the end of the cooking time
by pushing the
button and the
button to advance, or to go
backwards if you have passed the
desired time (g. 7.8).
AUTO and the
symbol will be on.
Then set the temperature and the cooking
programme using the oven switch and
thermostat knobs (see specic chapters).
The oven is switched on and it will be
switched o󰀨 automatically at the end of the
desired time.
During cooking, the
symbol remains
on and by pressing the button you can
see the time that remains till the end of the
cooking.
The cooking program may be cancelled
at any time by pushing
.
At the end of the cooking time the oven
will turn o󰀨 automatically, the
symbol
will turn o󰀨, AUTO will ash and a buzzer
will be sound, which can be turned o󰀨 by
pushing any of the buttons except the
/
buttons.
Turn the switch and thermostat knobs to
zero and put the programmer onto “manual”
by pressing the button.
Attention: After a power cut the clock resets
to zero and cancels the set programs.
After a power cut, three zeros will ash on
the display.
Fig. 7.8
Fig. 7.7

DeLonghi DTR 906-DF Series Specifications

General

Brand	DeLonghi
Model	DTR 906-DF Series
Category	Cookers
Language	English