DeLonghi EC9155.YE - Page 13

13
PROBLEM CAUSE SOLUTION
If you want to change the type of coee You must remove all the beans present
in the machine
• Empty the beans container (A3) (if nec-
essary, operate the coee mill without
beans or use a vacuum cleaner to re-
move any remaining beans)
• Attach the portalter (C1) and operate
the coee mill a number of times with-
out beans to free the grinder. Attach the
portalter to the outlet of the grinder
(A13). Push the portalter to start
grinding: it stops automatically. Repeat
until the lter is empty
• Place the new coee in the beans
container
• If the amount of coee ground is not
enough to reach the perfect dose, pro-
ceed setting the appliance as for the
rst use
After grinding, the coee lter is empty The coee grinder funnel is clogged See section “6. Cleaning the grinder”.
After grinding, the ground coee in the
lter (C3) or (C4) does not reach the
“perfect dose”
The quantity of ground coee needs
adjusting
Adjust the quantity of coee with the dial
(B4). If the dial is already in the max. position,
select the second range of grinding adjust-
ment (see “3. Menù settings”- “Extra grinding
adjustment”).
You are using the 2 cup lter (C4) Make sure the 2X light is on
Over time the burrs wear down Address to a Customer Service Centre to
change burrs.