DeLonghi EC9155.YE - Page 5

5
LIGHTS EXPLANATION OF LIGHTS OPERATION
Flashing
The machine is warming up Wait until the ideal delivery temperature has
been reached
On
Insucient water in tank (A7) or water
tank not inserted correctly
Fill the tank or extract the tank and put it back
correctly
Flashing
You are trying to deliver a beverage but
water tank (A7) is empty
Fill the tank
Because the beans are too nely
ground, the coee is delivered too
slowly or not at all
Remove the portalter (C1) and repeat the
operations to make the coee, bearing in mind
the instruction given in the quick start guide
relative to the grinding section
The lter (C3) or (C4) is blocked Clean as described in section “5. Cleaning and
maintenance”.
The tank (A7) has been inserted incorrectly
and the valves on the bottom are not open
Press the tank down lightly to open the valves
on the bottom
Scale in the water circuit Descale as described in section “9. Descaling”
On
1-dose beverage is selected All the process (from grinding to delivery) is
setted for preparing 1 cup
On
2-doses beverages are selected All the process (from grinding to delivery) is
setted for preparing 2 cups
MIN MED MAX
On
Choose 1 of the 3 temperatures
available
See Quick Guide for tips.
Flashing
General alarm Turn the machine o and wait 10 minutes
before turning on again. If the problem con-
tinues, contact customer services.
Flashing
Steam function is selected and running In a few seconds the appliance starts steam
delivery
On - red
Descaling must be performed Descale the appliance as described in section
“9. Descaling”
Flashing - On
Descaling is selected Press OK (B6) to run descaling cycle or turn the
selection knot to the beverage desired
…
→
Red
Orange