DeLonghi EC9255.T - Page 5

5
Add beans to hopper.
Fresh is best; fill in just with
the quantity you need.
Store the remainder of
your beans in a vacuum
container.
The ideal setting depends on
your coffee bean type. Select
the right grind setting based on
the Roast Chart (next pages).
Select single or double
dose filter and place in the
portafilter. If you are using
the double filter, press the
button until the X2 light
comes on.
Please note: the x 2 selection
will double the volume of the
espresso shot as well.
Select the right dose based
on the Roast Chart. As a
reference, the darker the
roast of your coffee beans,
the higher the dose.
Insert the Dosing&Tamping
Guide to the portafilter: 1 push
and 2 turn until it locks.
1 2 5
Step 1 - grinding and dosing
Refer to “Roast Chart”
on next pages for
suggestions.
1
push
2
turn
Push the portafilter until you
hear a single “Click”, then
release: grinding starts and
stops automatically.
7
push
The Dosing&Tamping
Guide is used to avoid
coffee from spilling while
grinding, ensuring mess
free operation and more
consistent dosing.
3 4
BARISTA TIPS:
When preparing Cold Brew, a
grinding level between 4 and
6 is recommended.
6
Push the portafilter until you
hear a single “Click”, then
release: grinding starts and
stops automatically.
If needed, you can stop
the grinding cycle earlier
by simply pushing the
portalter until it clicks
again.