DeLonghi EC9255 - 9. DESCALING

10
A
B
A
B
9. DESCALING
1. IF PRESENT, REMOVE
THE WATER SOFTENER
DEVICE. Pour the des-
caler into the tank (A7)
up to the level A
marked inside the tank
(equal to one 100ml
packet).
2. A dd water (1 liter) up
to t he level B .
Then put the water tank
back in the appliance.
3. Turn the mode selector
dial (B8) to : the desca-
ling light (B3) ashes.
4. Make sure the portalter is
not attached and position a
recipient under the coee
outlet (A10), hot water
spout (A11) and steam
wand (A9).
5. Keep pressed for at least
3 seconds the OK button:
the OK light begins to
ash; descaling starts.
Please note
• Before use, read the instructions and the labelling on the descaler pack.
• It is important to use De’Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may result
in faults not covered by the manufacturer’s guarantee.
• Descaler could damage delicate surfaces. If the product is accidentally spilt, dry immediately.
4
1
5
2 3
RED
40
Minutes
De’Longhi Appliances s.r.l.
Via L. Seitz, 47 31100 Treviso - ITALY
Tel. +39 0422 4131
5413218631/04.15
Decalcificante per macchine da caffè
Descaler for coffee machines
Détartrant pour machines à café
Entkalker für Kaffeemaschinen
2 L
󲰳
Please note
• In case you start the descaling cycle by mistake, you can press the OK button
for 10 seconds; the rinsing cycle can not be stopped (from step 9).
6. The descale programme starts and the descaler liquid
comes out of the steam wand and coee outlet. The des-
cale programme removes limescale deposits from inside
the appliance by automatically performing a series of
rinses and pauses until the tank is empty.
Delivery stops and the OK light turns to blu. This indicates
that it is necessary to proceed with rinsing: see next page.
When the light (B3) comes
on, it is time to proceed descal-
ing the machine. The descaling
cycle can be run in any moment.