10
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries. Do not dispose of batteries in re.
Batteries may explode or leak. If the remote control is not be
used for a certain length of time, remove the batteries.
USING THE REMOTE CONTROL
• Point the remote control at the receiver(A5)on the air
conditioner.Theremotecontrolmustbenomorethan23
ft(7metres)awayfromtheappliance(withoutobstacles
betweentheremotecontrolandthereceiver).
• Theremotecontrolmustbehandledwithcare.Donotdrop
itorexposeittodirectsunlightorsourcesofheat.
max 23 ft
max 7 m
Note: Theremotecontrolcanbesafelystoredinthe
appropriatecompartmentA6(seegurepage3).
DESCRIPTION OF THE REMOTE CONTROL
D1) ON/STAND-BYbutton
D2) Whispercoolbutton
D3.1)Airowincrease/decreasebutton
D3.2)Temperatureincrease/decreasebutton
D4) Swingbutton(apswing)
D5) Timer button
D6) MODEbutton
D1
D2D6
D4D5
D3.1
D3.2
D3.1D3.2
TURNING THE APPLIANCE ON/OFF
• Plugintotheoutlet.
• Press the
button (D1) (when turned on, the air
conditionerstartsoperatinginthesamemodeaswhenit
wasturnedo).
• Toswitchtheapplianceo,pressbutton(D1)
.
Note: Neverswitchtheapplianceobyremovingtheplug.
Alwaysswitchitobypushingthe
buttonandwaitingfew
minutesbeforeremovingtheplug.Onlyinthiswaytheappli-
ancewillperformthestandardchecings.
SELECTING THE OPERATING MODES
Mostofthecommandsavailableontheremotecontrolcorre-
spondtothoseontheappliancecontrolpanel(C).
SELECTING THE TEMPERATURES
InconditioningandheatingmodespressbuttonD3.2toselect
thedesiredtemperature.
SELECTING THE AIR FLOW
Inconditioningandfanmodes,pressbuttonD3.1toselectthe
desiredairow.
Theairowavailableare:
Minimum air ow: whenmaximumsilent
operationisdesired.
Medium air ow:whenthenoiselevelneedsto
belowbutwithagoodcomfortlevel.
Maximum air ow:formaximumperformance.
Theapplianceautomaticallychoosestheairowbased
on the temperature selected and the environmental
conditions(Thisisavailableonlyintheairconditioning
mode).
WHISPER COOL (available in conditioning mode only)
By activating this function, the operatingnoiseisfurther re-
duced.Toactivateit,pressontheremotecontrolthe
(D2)
button.
Thedisplayshowstherelativesymbol(C12).
D