20
Personalizing Your MyFi
You can easily adapt your MyFi to the way you listen and
use the satellite radio. You can change how the display
appears, track stocks and other information, adjust your
MyFi’s audio output, and change how you use the display.
Simply press the “menu” button, rotate the dial to high-
light an option, and press the dial in to select. Your MyFi
guides you with instructions right on the screen.
If you ever get lost or decide not to change anything,
press the “menu” button to return to normal operation.
Or wait for about 15 seconds and your MyFi reverts by itself.
Adjusting audio
You can ADJUST THE BASS OR TREBLE, which affects
both the headphones and audio outputs of the home
stand and vehicle cradle.
1. Press the “menu”
button and use the
dial to select “Set
Audio.”
2. Select “Set Tone.”
3. Rotate the dial to high-
light either “bass” or
“treble.” Press the dial
in to select.
4. Rotate the dial to
change the bass or
treble level. Press the
dial in to confirm.
5. When you’re done,
press the “menu”
button until you return
to normal operation.
Caution: Before putting on the headset, always adjust
the volume setting at the lowest level to avoid possible
hearing damage.
To Next Page
Loading...
Need help?
General
