30
3/ Wireless association
ඹ Set all the receivers to association standby mode
by pressing their button for 3 seconds until the
/('ćDVKHV
ය Press
.
ර On the remote control press
and at the
same time and hold for 3 seconds until the LED
ćDVKHVWKHQUHOHDVH
7KHEOLQGVDUHDFWLYDWHGEULHć\ZKHQWKH
association is completed. The number of
associated items is displayed on the screen (ල).
You can associate up to 16 receivers
(or motors).