Delta Electronics ASDA-A Series User Manual

Chapter 10 Troubleshooting|ASDA-A&A+ Series
10-10 Revision April 2009
Display Fault Name Clearing Method
Command write-in error
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
Input power phase loss
Turn ARST (DI signal) ON to clear the fault. This
fault message can be removed automatically after
input power phase lost problem is solved.
Pre-overload warning
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
Internal command execution
time out
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
DSP communication error
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
DSP communication error
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
ASDA-A+ Series Only
Overcurrent
This fault message can be removed by restarting
the servo drive.
"Mismatch" error
This fault message can be removed by restarting
the servo drive.
Encoder error (Position
detector fault)
This fault message can be removed by rotating
the motor shaft first and then restarting the servo
drive.
Encoder error (Position
detector fault)
This fault message can be removed by restarting
the servo drive.
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com

Delta Electronics ASDA-A Series Specifications

General

Brand	Delta Electronics
Model	ASDA-A Series
Category	Servo Drives
Language	English