Chapter 8 Servo Parameters
Revision January 2011 8-37
P0 - 13★ CM5 Status Monitor 5 Address: 001AH, 001BH
Default: N/A Related Section:
Applicable Control Mode: ALL Section 4.3.5
Unit: N/A
Range: N/A
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to provide the value of one of the status monitoring functions
found in P0-02. The value of P0-12 is determined by P0-20 (desired drive status)
through communication setting or the keypad. The drive status can be read from the
communication address of this parameter via communication port.
P0 - 14 Reserved (Do Not Use)
P0 - 15 Reserved (Do Not Use)
P0 - 16 Reserved (Do Not Use)
P0 - 17 CM1A Status Monitor Selection 1 Address: 0022H, 0023H
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 127
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02. The selected drive
status will be displayed by P0-09.
For example:
Set P0-17 to 7, then all consequent reads of P0-09 will return the motor rotation speed
in r/min.
Call 1(800)985-6929 for Sales
Call 1(800)985-6929 for Sales
To Next Page
Loading...
