Delta Electronics ASDA-A2 Series - Page 283

Chapter 8 Servo Parameters
8-38 Revision January 2011
P0 - 18 CM2A Status Monitor Selection 2 Address: 0024H, 0025H
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 127
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02. The selected drive
status will be displayed by P0-10. Refer to P0-17 for explanation.
P0 - 19 CM3A Status Monitor Selection 3 Address: 0026H, 0027H
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 127
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02. The selected drive
status will be displayed by P0-11. Refer to P0-17 for explanation.
P0 - 20 CM4A Status Monitor Selection 4 Address: 0028H, 0029H
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 127
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02. The selected drive
status will be displayed by P0-12. Refer to P0-17 for explanation.
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com