Chapter 8 Servo Parameters
Revision January 2011 8-159
Settings:
The definition of this parmater is determined by macro command P5-97. Please refer to
P5-97 for explanation.
P5 - 94 CSDS Motion Control: Macro Parameter 3 Address: 05BCH, 05BDH
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: -2147483648 ~ +2147483647
Data Size: 32-bit
Display Format: Decimal
Settings:
The definition of this parmater is determined by macro command P5-97. Please refer to
P5-97 for explanation.
P5 - 95 CSDS Motion Control: Macro Parameter 2 Address: 05BEH, 05BFH
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: -2147483648 ~ +2147483647
Data Size: 32-bit
Display Format: Decimal
Settings:
The definition of this parmater is determined by macro command P5-97. Please refer to
P5-97 for explanation.
P5 - 96 CSDS Motion Control: Macro Parameter 1 Address: 05C0H, 05C1H
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: -2147483648 ~ +2147483647
Data Size: 32-bit
Display Format: Decimal
Settings:
The definition of this parmater is determined by macro command P5-97. Please refer to
P5-97 for explanation.
Call 1(800)985-6929 for Sales
Call 1(800)985-6929 for Sales
To Next Page
Loading...
