To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-322L and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Motor Power | 1.5 HP |
| Arbor Size | 5/8 inches |
| Voltage | 120 V |
| Max. Rip Left of Blade | 12 inches |
| Max. Depth of Cut at 90 Degrees | 3-1/8 inches |
| Max. Depth of Cut at 45 Degrees | 2-1/4 inches |
| Weight | 90 lbs |
| No-Load Speed | 5000 RPM |
| Rip Capacity | 30 inches |
Defines safety symbols and terms used in the manual.
General safety precautions for operating power tools.
Specific safety rules for this particular miter saw.
Safety precautions related to the laser guide feature.
Information on electrical connections and extension cord usage.
Details about the saw's motor specifications.
Overview of the saw's features and items included in packaging.
Step-by-step instructions for assembling the miter saw.
Instructions for operating and adjusting the saw's fence.
How to safely start and stop the miter saw.
Procedures for locking the power switch to prevent accidental startup.
How to adjust the table for miter cuts.
How to ensure the fence is perpendicular to the blade.
Instructions for tilting the cutting head for bevel cuts and using positive stops.
How to adjust the bevel locking mechanism for smoother operation.
Explanation of how the laser system functions and its intended use.
Steps for aligning and adjusting the laser lines to match the blade's cut.
Maintenance procedures for keeping the laser system clean and functional.
Tips and guidance for performing typical cutting operations safely and effectively.
Guidance on cutting oversized materials that may not fit under the guard.
Safety precautions and procedures for cutting aluminum with the saw.
How to cut bowed material to avoid pinching the blade.
Instructions for building and using work support extensions for long materials.
Methods for cutting crown moulding in vertical and horizontal positions.
Step-by-step instructions for safely replacing the saw blade.
Procedures for cleaning the saw and lubricating its table and surfaces.
Steps to diagnose and resolve issues when the machine fails to start.
Procedure for inspecting and replacing the motor brushes.
How to obtain replacement parts and contact for service.
Information on accessories available for the miter saw.
Details of the product's limited warranty coverage.
