To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-725 and is the answer not in the manual?
General| Blade Diameter | 10 inches |
|---|---|
| Voltage | 120V |
| Dust Port Diameter | 2.5 inches |
| Max Rip Right | 30 inches |
| Max Depth of Cut at 90 Degrees | 3.5 inches |
| Max Depth of Cut at 45 Degrees | 2.5 inches |
| Motor | 15 Amp, 120V |
| Rip Capacity | 30 inches right of blade |
| Arbor Size | 5/8 inches |
| Max Rip Left | 15 inches |
| Bevel Capacity | 45 degrees |
Defines severity levels for signal words (Danger, Warning, Caution).
Maintaining alertness and common sense during operation.
Wearing safety glasses with side shields.
Using dust collection and respiratory protection.
Prohibits freehand, plunge, resawing, or cove cuts.
Mandates PPE: eye, apparel, hearing, and dust protection.
Emphasizes using all safety components for every operation.
Strict rule to keep body parts away from the blade.
Defines kickback and provides measures to reduce its risk.
Disconnected power before freeing blades; avoid starting against blade.
Explains the function and importance of these safety components.
Crucial instructions for safely grounding the machine.
Check and ensure alignment of the riving knife and blade.
General warnings and preparation steps before cutting.
Detailed steps for safely replacing the saw blade.
Procedures to check and ensure riving knife alignment.
Explains the correct position of the riving knife for different cuts.
Procedures for checking and aligning the rip fence.
A pre-operation checklist to ensure readiness and safety.
Explanation of kickback and how to avoid it.
Step-by-step instructions for performing rip cuts.
Step-by-step instructions for performing crosscuts.
Instructions for performing compound miter cuts.
General warnings and guidelines before making cuts.
Instructions for performing miter cuts.
Procedures for making grooves, rabbets, and dados.
Mandates using the rip fence for all ripping operations.
Crucial warning about grounding the receptacle for 240V.
