Delta 36-714 User Manual

INSTRUCTION MANUAL
Delta 10" Hybrid Saw
(Model 36-714)
PART NO. A08139 - 11-12-04
Copyright © 2004 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).
NOTE: Shown with BC30 30” Biesemeyer Fence

Delta 36-714 Specifications

General

Type	Table Saw
Blade Diameter	10 inches
Motor Power	1.5 HP
Table Size	27 inches x 40 inches
Weight	240 lbs
Arbor Size	5/8 inches
Motor	Induction
Voltage	120V
Amperage	15A
Max. Rip Right of Blade	30 inches
Max. Rip Left of Blade	12 inches
Max. Depth of Cut at 90 Degrees	3-1/8 inches
Max. Depth of Cut at 45 Degrees	2-1/4 inches
Rip Capacity	30 inches

Summary

Important Safety Instructions

Safety Guidelines and Definitions

Defines safety terms and symbols for hazard recognition.

General Safety Rules

Lists fundamental safety rules for operating equipment.

Additional Specific Safety Rules

Provides specific safety precautions for table saws.

California Proposition 65 Warning

Power and Grounding

Power Connections

Grounding Instructions

Explains the importance and procedure for grounding the machine to prevent electric shock.

Extension Cord Recommendations

Assembly and Installation

Assembling Blade Guard and Splitter

Blade Guard and Splitter Final Steps

Saw Blade Installation

Aligning Splitter with Blade

Operation

Operational Controls and Adjustments

Starting and Stopping the Saw

Instructions on how to safely turn the saw on and off.

Locking Switch in Off Position

Overload Protection

Adjusting 90 and 45 Degree Stops

Checking Blade Alignment

Adjusting Blade Alignment

Machine Use

Common Sawing Operations

Cross-Cutting Techniques

Ripping Techniques

Troubleshooting

Maintenance and Service

Failure to Start

Lubrication and Rust Protection

Parts, Service, and Warranty Assistance

Contact information for obtaining parts, service, or warranty support.