Delta 40-570 User Manual

1
INSTRUCTION MANUAL
16" Variable Speed Scroll Saw
with Quickset II Blade
Changing Feature
(Model 40-570)
PART NO. 898602-0010
Copyright © 2000 Delta Machinery
ESPAÑOL: PÁGINA 15
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-888-848-5175 (In Canada call 1-800-463-3582).
®

Delta 40-570 Specifications

General

Brand	Delta
Model	40-570
Category	Saw
Language	English

Summary

Safety Rules

Additional Safety Rules for Scroll Saws

Foreword and Initial Setup

Connecting to Power Source

Guidelines for connecting the scroll saw to power, including extension cord selection and motor specifications.

Grounding Instructions

Grounded Cord-Connected Tools

Instructions for grounding all cord-connected tools, including plug and outlet requirements.

Tools on 150-Volt Circuits

Specific grounding guidance for tools used on supply circuits under 150 volts, including adapter use.

Fastening, Operation, and Maintenance

Fastening Scroll Saw to Supporting Surface

On-Off Switch and Variable Speed Control

Details on operating the power switch and adjusting the variable speed control for optimal cutting.

Table Insert and Blade Handling

Changing Blades

Step-by-step guide to safely remove and replace scroll saw blades.

Blade Tension and Clamping

Adjusting Blade Tension

Guidance on setting proper blade tension using the tension lever and knob for optimal cutting performance.

Table Adjustments and Cutting Techniques

Tilting the Table

Leveling the Table

Workpiece Support and Inside Cutting

Adjusting Holddown

Inside Cutting Procedure

Maintenance and Blade Selection

Choice of Blade and Speed

Blade Breakage Causes