Need help?Do you have a question about the Delta 40-650 and is the answer not in the manual?
General| Type | Scroll Saw |
|---|---|
| Blade Diameter | 5 inches |
| Stroke Length | 3/4 inch |
| Blade Type | Pin End |
| Bevel Capacity | 0 - 45 degrees left and right |
Instructions for assembling the saw stand using carriage bolts, washers, and nuts.
Steps to secure the scroll saw to the assembled stand using screws and washers.
Guidelines on selecting appropriate extension cords based on length and gauge.
Procedures and precautions for properly grounding the tool for electrical safety.
Method for setting proper blade tension using the tension lever and checking pitch.
Step-by-step procedure for safely removing and installing saw blades.
To Next Page
