To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-451X and is the answer not in the manual?
Explains safety symbols and definitions for hazard identification in the manual.
Lists critical safety rules and precautions for operating the contractor's saw safely.
Provides additional safety rules unique to operating the contractor's saw.
Details proper electrical hookup, motor specifications, and essential grounding procedures.
Recommends correct extension cord gauge and length based on machine requirements.
Step-by-step instructions for assembling the saw stand and attaching the main saw unit.
Covers motor mounting, pulley installation, belt tension, and drive belt connection.
Explains how to start, stop, lock the switch, and understand motor overload protection.
Guides on raising, lowering, and tilting the saw blade for various cuts.
Procedures for checking, adjusting blade alignment, and replacing the saw blade.
Details the operation and adjustment of the miter gage for precise cutting.
Explains safe techniques for crosscutting and ripping wood.
Instructions for using moulding and dado cutterhead accessories safely.
Guides on constructing push sticks and featherboards for enhanced safety.
Covers cleaning, rust prevention, motor storage, and general upkeep.
Provides contact details for parts, service, and warranty assistance.
General
