To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-545 and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inches |
| Max Depth of Cut at 90 Degrees | 3-1/8 inches |
| Bevel Capacity | 45 degrees |
Assembling the handwheel for blade height adjustment.
Instructions for securing the saw to a workbench or stand.
How to mount the saw onto its assembled stand.
Essential safety instructions for proper tool grounding.
Overview of the saw's controls and adjustment features.
How to adjust the blade height using the handwheel.
How to tilt the saw blade to different angles.
Setting precise 90 and 45-degree blade angle stops.
How to operate and adjust the rip fence for accurate cuts.
How to operate and adjust the miter gage for cross-cutting.
How to ensure the blade is parallel to the miter gage slots.
Step-by-step guide for replacing the saw blade.
Technique for making cross-cuts using the miter gage.
Adding wood facing to the rip fence for specific tasks.
How to build a featherboard for improved workpiece control.
Details of the manufacturer's limited warranty coverage.
