To Next PageTo Next PageWhat to do if my Delta 36-5000 T2 Saw fails to start?
If your Delta Saw fails to start, make sure the prongs on the cord plug are making good contact in the receptacle, and check the reset button on the power switch housing. Also, check for blown fuses or open circuit breakers in your power line.
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Motor Power | 1.5 HP |
| Voltage | 120 V |
| Max Rip Left | 12 inches |
| Arbor Size | 5/8 inches |
| Weight | 78 lb |
| Max Rip Right | 30 inches |
| Max Depth of Cut at 90 Degrees | 3.125 inches |
| Max Depth of Cut at 45 Degrees | 2-1/4 inches |
| Dust Port | 2-1/2 inches |
Overall safety guidance and warnings for the product.
Provides essential safety guidelines for all power tools.
Specific safety precautions for operating a table saw.
Detailed safety rules specific to table saw operations.
Details power requirements and connection instructions.
Guidelines for using appropriate extension cords.
Lists components and hardware for specific models.
Details the hardware included in specific packages.
Instructions for assembling the saw stand and attaching wheels/feet.
Steps for attaching front/rear rails and extension wings.
Installing fence guide, handles, and power control box.
Instructions for installing blade guard and anti-kickback pawls.
Attaching rip fence, miter gauge, and securing the saw.
Adjusting bevel stops for accuracy and aligning the riving knife.
Adjusting miter gauge scale/fit and ensuring proper fence alignment.
Adjusting blade height, tilting, and riving knife position.
Checking riving knife alignment and blade parallelism.
Using miter gauge, blade guard, and checking fence alignment.
Procedures for safely operating the saw and managing overload.
Detailed steps for performing rip cuts and crosscuts.
Using push sticks, blocks, and featherboards for safe workpiece handling.
Guidance on using flip down fence and push blocks.
Procedures for cleaning, lubricating, and protecting the saw.
Adjusting belt tension and cleaning the dust collection chute.
Troubleshooting steps for when the saw fails to start.
Details of the product's limited warranty coverage.
Information on obtaining service and repair for the saw.
